Canton 22-480 Thermostat For Oil Cooler Black And Clear Anodized
$286.80
BGTF-22-480
Cylinder Block Components
Engine
Engine Oil Thermostat
Our Oil Cooler Thermostat helps your engine's oil come up to temperature quickly and holds it at the right temperature. Cold oil does not...
Canton 22-420 Copper Washer For Drain Plug 1/2 Inch Package Of 10
$12.00
BGTF-22-420
Engine
Engine Oil Drain Plug
Hardware, Fasteners and Fittings
1/2" Copper Drain Plug Washers, Package of 10. Copper washers are far superior to the standard plastic washers. Magnetic drain plugs collect steel particles...
Canton 22-410 Drain Plug And Washer Magnetic 1/2 Inch -20 Package Of 10
$46.80
BGTF-22-410
Engine
Engine Oil Drain Plug
Hardware, Fasteners and Fittings
1/2" -20 Magnetic Plugs & Washers, Package of 10. Magnetic Drain Plugs collect steel particles, keeping your oiling system clean and allowing you to...
Canton 22-405 20MM X 1.5 Plug For GM Oil Level Sender Ports
$12.00
BGTF-22-405
Engine
Engine Oil Drain Plug
Hardware, Fasteners and Fittings
20mm x 1.5 Oil Level Plug for 15-240, 15-244 and 15-276 oil pans. It includes a copper washer which is far superior to the...
Canton 22-400 Drain Plug And Washer Magnetic 1/2 Inch -20 Single
$8.40
BGTF-22-400
Engine
Engine Oil Drain Plug
Hardware, Fasteners and Fittings
1/2" -20 Magnetic Drain Plug & Washer. This magnetic drain plug collects steel particles, keeping your oiling system clean and allowing you to check...
Canton 22-370 Bolt Kit For Oil Pan Mounting Honda S2000 F Series Motor
$16.80
BGTF-22-370
Engine
Engine Oil Sump Stud Kit
Hardware, Fasteners and Fittings
Hardware kit for Canton Racing Products 15-966 Honda S2000 F Series Oil Pan. Studs hold the gasket in place to help alignment during installation...
Canton 22-364 Stud Kit For Oil Pan Mounting Ford 4.6L/5.4L Mod & 5.0 Coyote
$20.40
BGTF-22-364
Engine
Engine Oil Sump Stud Kit
Hardware, Fasteners and Fittings
This Ford 4.6L/5.4L Mod & 5.0 Coyote Oil Pan Stud Kit makes the installation of the oil pan easier. The studs hold the gasket...
Canton 22-362 Stud Kit For Oil Pan Mounting Ford FE
$22.80
BGTF-22-362
Engine
Engine Oil Sump Stud Kit
Hardware, Fasteners and Fittings
This Ford 332-428 FE Oil Pan Stud Kit makes the installation of the oil pan easier. The studs hold the gasket in place while...
Canton 22-360 Stud Kit Oil Pan Mounting Ford 302/351W/Cleveland/Big Block Ford
$21.60
BGTF-22-360
Engine
Engine Oil Sump Stud Kit
Hardware, Fasteners and Fittings
This Oil Pan Stud Kit is for Ford 302, 351W, 351C, 351M, 400M & 429-460 engines. It makes the installation of the oil pan...
Canton 22-320 Bolt Kit For Oil Pan Mounting Big Block Chevy For Stroker
$16.80
BGTF-22-320
Engine
Engine Oil Sump Stud Kit
Hardware, Fasteners and Fittings
BBC Stroker Oil Pan Allen Bolts. Oil pan mounting bolt kit for Striker pans Made In USA Canton Racing Products has been building oil...
Canton 22-310 Stud Kit For Oil Pan Mounting Big Block Chevy
$24.00
BGTF-22-310
Engine
Engine Oil Sump Stud Kit
Hardware, Fasteners and Fittings
This BBC, Pontiac, and SB & BB Mopar Oil Pan Stud Kit makes the installation of the oil pan easier. The studs hold the...
Canton 22-304 Stud Kit For Oil Pan Mounting Dart LS Next
$19.20
BGTF-22-304
Engine
Engine Oil Sump Stud Kit
Hardware, Fasteners and Fittings
This LS Next Oil Pan Stud Kit makes the installation of a Dart LS Next oil pan easier. The studs hold the gasket in...
Canton 22-302 Stud Kit For Oil Pan Mounting GM LS1
$20.40
BGTF-22-302
Engine
Engine Oil Sump Stud Kit
Hardware, Fasteners and Fittings
This product is for owners of GM LS1/LS6 motors who are changing their oil pan and want the ease of installing their oil pan...
Canton 22-300 Stud Kit For Oil Pan Mounting Small Block Chevy/Oldsmobile/AMC
$20.40
BGTF-22-300
Engine
Engine Oil Sump Stud Kit
Hardware, Fasteners and Fittings
This SBC, AMC Oil Pan Stud Kit makes the installation of the oil pan easier. The studs hold the gasket in place while installing...
Canton 22-190 Oil Pump Spring For Big Block Chevy Extra High Pressure 60-85 PSI
$4.80
BGTF-22-190
Engine
Engine Oil Pump Relief Valve Spring
Hardware, Fasteners and Fittings
A higher pressure bypass spring in an oil pump forces more oil through the engine while a lower pressure spring allows for more oil...
Canton 22-180 Oil Pump Spring For Big Block Chevy High Pressure 50-75 PSI
$4.80
BGTF-22-180
Engine
Engine Oil Pump Relief Valve Spring
Hardware, Fasteners and Fittings
A higher pressure bypass spring in an oil pump forces more oil through the engine while a lower pressure spring allows for more oil...
Canton 22-150 Oil Pump Spring For Small Block Chevy High Pressure 40-65 PSI
$3.60
BGTF-22-150
Engine
Engine Oil Pump Relief Valve Spring
Hardware, Fasteners and Fittings
A higher pressure bypass spring in an oil pump forces more oil through the engine while a lower pressure spring allows for more oil...
Canton 22-130 Oil Pump Spring For Ford 289 And 302 High Pressure
$32.40
BGTF-22-130
Engine
Engine Oil Pump Relief Valve Spring
Hardware, Fasteners and Fittings
Ford 289-302 high pressure oil pump spring kit. A higher pressure bypass spring in a oil pump forces more oil through the engine while...
Canton 22-000 Mounting Stud For Small Block Chevy And Big Block Chevy Oil Pump
$32.40
BGTF-22-000
Engine
Engine Oil Pump Bolt
Hardware, Fasteners and Fittings
This Oil Pump Mounting Stud can be permanently secured in the main cap then the pump can be repeatedly replaced without fear of damage...
Canton 21-900 Timing Cover For Small Block Chevy Gold Iridite Steel
$46.80
BGTF-21-900
Engine
Engine Timing Cover
Valve Train Components
Small Block Chevy Timing Cover is manufactured in the U.S.A. to O.E.M. specifications to ensure a correct fit. The crank seal is precisely centered...
Canton 21-870 Flywheel Cover For Chevy LS T56 Transmission W/ F-Body Bellhousing
$57.60
BGTF-21-870
Cylinder Block Components
Engine
Engine Cover
If you have installed or will be installing an aftermarket performance pan on your LS block this bellhousing flywheel cover is just what you...
Canton 21-850 Rear Main Seal Adapter Converts 1 Pc SBC To 2 Pc Seal
$270.00
BGTF-21-850
Engine
Engine Crankshaft Seal Adapter
Hardware, Fasteners and Fittings
This SBC rear main seal adapter converts 86 and newer blocks with one piece rear main seals to accept an older style two piece...
Canton 21-302 Drive Shaft For Ford 351W Oil Pump
$25.20
BGTF-21-302
Cylinder Block Components
Engine
Engine Oil Pump Shaft
Our 351w Oil Pump Drive Shaft is made from Chromoly steel and is designed to replace the stock shaft. These units are larger in...
Canton 21-300 Drive Shaft For Ford 302 Oil Pump
$25.20
BGTF-21-300
Cylinder Block Components
Engine
Engine Oil Pump Shaft
Our 302 Oil Pump Drive Shaft is made from Chromoly steel and is designed to replace the stock shaft. These units are larger in...
Canton 21-250 Drive Shaft For Big Block Chevy Oil Pump
$25.20
BGTF-21-250
Cylinder Block Components
Engine
Engine Oil Pump Shaft
This BBC Oil Pump Drive Shaft is made from high grade steel and is designed to replace the stock shaft. This unit features a...
Canton 21-210 Drive Shaft For Small Block Chevy With Big Block Pump
$25.20
BGTF-21-210
Cylinder Block Components
Engine
Engine Oil Pump Shaft
This SBC with BBC (5 bolt) oil pump conversion Oil Pump Drive Shaft is made from high grade steel and is designed to replace...
Canton 21-200 Drive Shaft For Small Block Chevy Oil Pump
$19.20
BGTF-21-200
Cylinder Block Components
Engine
Engine Oil Pump Shaft
Our SBC Oil Pump Drive Shaft is made from high grade steel and is designed to replace the stock shaft. This unit features a...
Canton 21-066 Main Cap Support For Ford 460 With Mounting Bolts
$534.00
BGTF-21-066
Cylinder Block Components
Engine
Engine Crankshaft Main Bearing Cap Girdle
Ford 429-460 Main Support. Machined to clear at least a 4.50 stroke. Ford 429-460 Main Support Made In USA Machined to clear at least...
Canton 21-062 Main Cap Support For Ford 351W With Mounting Bolts
$510.00
BGTF-21-062
Cylinder Block Components
Engine
Engine Crankshaft Main Bearing Cap Girdle
Ford 351W Main Support. Machined to clear at least a 4.00 stroke. Made In USA Machined to clear at least a 4.00" stroke Attributes:...
Canton 21-060 Main Cap Support For Ford 302 With Hardware
$394.80
BGTF-21-060
Cylinder Block Components
Engine
Engine Crankshaft Main Bearing Cap Girdle
Ford 289-302 Main Support. Machined to clear at least a 3.40 stroke. Will not work with stock pans. Ford 289-302 Main Support Machined to...
Canton 20-956 Big Block Ford Oil Pump Pickup Stud
$54.00
BGTF-20-956
Engine
Engine Crankcase Stud
Hardware, Fasteners and Fittings
Pickup Main Cap Mounting Stud for Ford 429-460 Based Engines. Pickup Main Cap Mounting Stud for Ford 429-460 Based Engines Made In USA Steel...
Canton 20-953 Ford 351W Oil Pump Pickup Stud
$50.40
BGTF-20-953
Engine
Engine Crankcase Stud
Hardware, Fasteners and Fittings
Pickup Main Cap Mounting Stud for Ford 302R, 351W, 351C, 351M, and 332-428 FE Based Engines. Pickup Main Cap Mounting Stud for Ford 302R,...
Canton 20-950 Ford 302 Oil Pump Pickup Stud
$43.20
BGTF-20-950
Engine
Engine Crankcase Stud
Hardware, Fasteners and Fittings
Pickup Main Cap Mounting Stud for Ford 302 Based Engines. Pickup Main Cap Mounting Stud for Ford 302 Based Engines Made In USA Steel...
Canton 20-946 Windage Tray Mounting Kit For Big Block Ford
$165.60
BGTF-20-946
Cylinder Block Components
Engine
Engine Oil Sump Windage Tray Mounting Kit
This 429-460 OEM style windage tray mounting kit. (bolts) For Ford 429-460 OEM style windage tray Made In USA Includes 4 Bolts, nuts, and...
Canton 20-942 Windage Tray Mounting Kit For Ford 351W
$130.80
BGTF-20-942
Cylinder Block Components
Engine
Engine Oil Sump Windage Tray Mounting Kit
This 351W / 351C Windage tray mounting kit includes four accessory mounting main cap studs, nuts, washers and tray mounting nuts. This 351W/351C Wind...
Canton 20-966 Windage Tray For 21-066 Main Support Ford 429 460
$81.60
BGTF-20-966
Cylinder Block Components
Engine
Engine Oil Sump Windage Tray
This Main Support Windage Tray is for Ford 429-460. It bolts to the pre-drilled and tapped holes on our main supports. This tray keeps...
Canton 20-962 Windage Tray For 21-062 Main Support Ford 351W With Mounting Bolts
$81.60
BGTF-20-962
Cylinder Block Components
Engine
Engine Oil Sump Windage Tray
This Main Support Windage Tray is for Ford 351W. It bolts to the pre-drilled and tapped holes on our main supports. This tray keeps...
Canton 20-960 Windage Tray For 21-060 Main Support Ford 289 302
$81.60
BGTF-20-960
Cylinder Block Components
Engine
Engine Oil Sump Windage Tray
This Main Support Windage Tray is for Ford 289-302. It bolts to the pre-drilled and tapped holes on our main supports. This tray keeps...
Canton 20-943 Windage Tray Stud Kit Main Caps & 2 Bolt Block For Ford 351W/351C
$124.80
BGTF-20-943
Cylinder Block Components
Engine
Engine Oil Sump Windage Tray
This 351W / 351C Full main cap stud kit for use with our Windage Tray. It includes four accessory mounting main cap studs, nuts,...
Canton 20-941 Windage Tray Stud Kit For Main Caps And 2 Bolt Block For Ford 302
$76.80
BGTF-20-941
Cylinder Block Components
Engine
Engine Oil Sump Windage Tray
This 289-302 Full main cap stud kit is for use with our Windage Tray. It includes four accessory mounting main cap studs, nuts, washers...
Canton 20-940 Windage Tray Mounting Kit For Ford 289 302
$90.00
BGTF-20-940
Cylinder Block Components
Engine
Engine Oil Sump Windage Tray Mounting Kit
This 289-302 Windage tray mounting kit includes four accessory mounting main cap studs, nuts, washers and tray mounting nuts. This 289-302 Wind age tray...
Canton 20-939P Windage Tray For 4.6L Ford Louver Includes Oil Pan Studs And Nuts
$134.40
BGTF-20-939P
Cylinder Block Components
Engine
Engine Oil Sump Windage Tray
4.6/5.4 Ford louvered windage tray for stock or aftermarket oil pans. Mounts between the oil pan and block, includes oil pan studs and nuts....